Vertical Mixing Homogenizer

 Displacement pump or from a pressurized feed system inlet into the liquid phase..

 

The injection is distributed to the coaxial drum of the LY vertical mixing emulsifier and enters the pre-mixing chamber through multiple holes.

 

Use the batching device to vertically feed the solids into the pre-mixing chamber from the top through the chute. The dry material area and the wet material pre-mixing chamber are separated by the feed screw.

 

The liquid phase and solid phase are mixed in a certain proportion when leaving the pre-mixing chamber, immediately by the high station in the pre-mixing chamber. And

 

ear rotor.

 

The mixed product is discharged from the low liquid outlet of the device under the action of gravity and centrifugal force. This unique method of wetting reduces entrapped air in solid /liquid dispersion systems.

 

Features of powder homogenizer

 

With CIP/SIP function

 

Manufactured according to chwdg guidelines

 

Riot control according to atex95 guidelines

 

Modular design, compact structure, easy to clean

 

According to the different materials, solid content can reach about 80%

 

The variety of mixing tools can meet different process requirements

 

Mixing/homogenizing/dispersing is done continuously on one machine, saving energy. Efficient and stable

 

PLC control, touch screen operation, can achieve automatic, semi-automatic control mode switch

 

The vertical mixer has two horizontal liquid interfaces and one vertical solid material interface

 

All parts in contact with the liquid are 316L or 316TI stainless steel and are certified to the 3a sanitary standard

 

For more information about homogenizer mixing tank, please feel free to contact us!

 

If you are looking for a reliable grinding equipment factory, please contact us.



评论

发表评论

此博客中的热门博文

The Comparison Between Fabric Air Duct and Galvanized Iron Air Duct (Part I)

图片
Due to the problems and inconvenience caused by the use of traditional iron air duct, the combination of traditional iron air duct and fabric air duct began to be applied in central air-conditioning in large space. Such combination will not only achieve the purpose of environmental protection and energy saving, but also exert the effect of central air-conditioning to the maximum extent. Now let's talk about the differences between the two duct systems in usage and performance. (1) The convenience of construction galvanized iron duct is suitable for large size processing, and the mechanical processing of it is convenient, but the processing of small-size galvanized ac duct is slow and takes a long cycle because it is not inconvenient to use mechanical equipment. In addition, it is difficult to control the installation precision during the construction of pre insulated galvanised ac ducts; other accessories of the same size are not easy to produce; the installation is difficult ...
阅读全文

Durkee India Jess Ideas

图片
  Yantai International Exhibition Center located in the center of Laishan District of the costal city-Yantai, bordered by Sport Park in the west and university town in the south and surrounded by protection forest in the north. The exhibition center covers an area of 267,000 m2, it’s the largest and highest grade as well as most attractive complex center in Yantai. The exhibition center was a key project in Yantai in 2006. It began construction on Dec. 30, 2005 and completed on Oct. 2006 to hold “Euro-Asia International Travel Expo”.   The exhibition center consists of several halls with a similar layout, and each hall covers an area of approximately 5,000 m2 with a 15m interior space. The spacious and bright halls have broad exhibition area, the halls didn’t decorate too much except the spot lights which were installed on the wall. The simplicity decorative style would bring a tough problem to traditional air dispersion duct, because the traditional air dispersion duct distri...
阅读全文

Industrial AC Duct Application

图片
  Exposed ventilation  duct has the following advantages: post line air apply, lightweight, quick installation and easy maintenance. Durkee   industrial ventilation duct  system has been widely applied in auto factory, machinery plant, producing plant or logistic warehouse, textile plant, assembly plant, food factory, and cold storage. With the exposed ac duct , the environment is efficiently improved.     The following is our successful cases of industrial air ducts .   Choose Solution Machinery Factory   Logistics Warehouse   Tobacco   Textile&Garment   Electronics Plant & IT Data Center   Food Processing Plant   Cold Storage and Refrigeration Industry   Automobile & Accessories Factory   Pre-Insulated Air Duct for TPI Wind Blade Factory TPI project is a landmark project of Durkee with the large-scale application of Insusox pre-insulated fabric air supply and return system.   Nanosox industrial...
阅读全文